Beck Mixer Advantage:

Beck Industrial listens to customers. Beck equipment is the result of quality manufacturing capabilities refined with the practical demands of our industry. Beck owners and department heads ride with drivers, visit pours, and collaborate with mixer mechanics. This practical expertise provides Beck engineers with information needed to innovate product performance, safety, and maintenance. Beck Industrial owes its success to the singular principle of listening to customers and applying their knowledge to the product.

Beck Mixer Key Features:

Mixer

Mixer 9-12 cubic yard TMMB rated mixers certified for volume and performance.

Certification

NRMCA Truck Mixer Manufacturers Bureau

Drum

*New* 3/16” x 3/16” HARDOX 450 drum option.

1/4 AR200 head; 3/16 & 1/4 AR200 steel drum shell; 3/16 & 1/4 AR200 blades with wear rods; submerged arc welded outside seams; 1040 machined drum track; 42 (standard) & 46 (paver) discharge openings; auxiliary surge fins and bolt-on inspection hatch. Vortex Mix Efficiency head blade system standard on all Beck Mixers.

Transmission

Model ZF P-7300, PK-7500, and Ecomix II CML 12

Hydrostatic Drive

Bosch Rexroth and Eaton pump and motor packages available. Cable, wireless, or CAN-Bus intelligent mixer controls.

Water System

90-150 gallon side, cross, or overhead mounted steel or aluminum water tank. Diaphragm pump and non pressurized tank system available.

Drum Rollers

Special alloy steel adjustable drum roller; tapered bearings; double sealed; center shaft lubrication, roller surface hardened to 500 brinell; remote greasing on rear pedestal for safety and convenience.

Charge Hopper

48 x 30 top opening; 26 throat; hopper bolts at top for the optional removal and air tilt option.

Rear Pedestal

Rear enclosed, fully reinforced with bracing throughout the body of the pedestal; fully reinforced roller deck and uprights equipped with drain holes to prevent buildup around rollers.

Ladder

Non-skid ladder rungs and extended platform base for enhanced visibility; fold down boarding extension; guard rail on top platform; easiest incline climbing angle in the industry. Grab handles run the length of the ladder; fully reinforced lower platform.

Controls

Cab and rear controls for all mixer functions and truck throttle. Several options including classic cable controls, OMNEX wireless radio controls, and the Beck Industrial CAN-Bus intelligent mixer system.

Chutes

Paving main chute with transitional or paving fold-over; 4 or 3 extension chutes; positive 7 position pin lock; air chute brake. Optional vertical mount. 18 ga. Ultralight steel extensions come standard.

Chute Hoist

2 diameter, double acting hydraulic chute lift cylinder.

Revolution Counter

Electric digital revolution counter mounted with resettable read out. Features magnetic sensor control.

Fenders

14 gauge steel, plastic, or aluminum flat top, 1-piece or 3-piece with heavy duty end plates, recessed & protected light sockets; Front and rear mud flaps. Optional utility step rear impact guard.

Paint

Mixer and components sand blasted SSPC prior to painting. Primed with zinc rich epoxy primer. Finish coated with chip and crack resistant Industrial poly-urethane; Optional clear coat.

Safety

Mixers furnished with standard safety decals and back-up alarm. Other safety features available

Download Brochure

Top