Power to the Producers
Beck Industrial listens to customers. Beck equipment is the result of quality manufacturing capabilities refined with practical application expertise. Beck owners and department heads ride with drivers, visit pours, and collaborate with mixer mechanics. This practical expertise provides Beck engineers with information needed to innovate product performance, safety, and the ease with which drivers operate and mechanics maintain the equipment. Beck Industrial owes its success to the singular principle of listening to customers and applying their knowledge to the product.
Beck Mixer Key Features:
Mixer 8-12 cubic yard TMMB rated mixers certified for volume and performance.
NRMCA Truck Mixer Manufacturers Bureau
1/4 AR200 head; 3/16 & 1/4 AR200 steel drum shell; 3/16 & 1/4 AR200 blades with wear rods; submerged arc welded outside seams; 1040 machined drum track; 42 (standard) & 46 (paver) discharge openings; auxiliary surge fins and bolt-on inspection hatch. Vortex Mix Efficiency head blade system standard on all Beck Mixers.
Model ZF P-7300, PK-7500, and Ecomix II CML 10
Bosch Rexroth A4VTG heavy duty variable displacement pump. Cable, wireless, or CAN-Bus electronic rotation controls. Front or REPTO mounted. Bosch Rexroth motor. Comparable Eaton pump and motor packages available.
90-150 gallon side, cross, or overhead mounted steel or aluminum water tank. Diaphragm pump and non pressurized tank system available.
Special alloy steel adjustable drum roller; tapered bearings; double sealed; center shaft lubrication, roller surface hardened to 500 brinell; remote greasing on rear pedestal for safety and convenience.
48 x 30 top opening; 26 throat; hopper bolts at top for the optional removal and air tilt option.
Rear enclosed, fully reinforced with bracing throughout the body of the pedestal; fully reinforced roller deck and uprights equipped with drain holes to prevent buildup around rollers.
Non-skid ladder rungs and extended platform base for enhanced visibility; fold down boarding extension; guard rail on top platform; easiest incline climbing angle in the industry. Grab handles run the length of the ladder; fully reinforced lower platform.
Cab and rear controls for all mixer functions and truck throttle. Several options including classic cable controls, OMNEX wireless radio controls, and the Beck Industrial CAN-Bus intelligent mixer system.
Paving main chute with transitional or paving fold-over; 4 or 3 extension chutes; positive 7 position pin lock; air chute brake. Optional vertical mount. 18 ga. Ultralight steel extensions come standard.
2 diameter, double acting hydraulic chute lift cylinder.
Electric digital revolution counter mounted with resettable read out. Features magnetic sensor control.
14 gauge steel, plastic, or aluminum flat top, 1-piece or 3-piece with heavy duty end plates, recessed & protected light sockets; Front and rear mud flaps. Optional utility step rear impact guard.
Mixer and components sand blasted SSPC prior to painting. Primed with zinc rich epoxy primer. Finish coated with chip and crack resistant Industrial poly-urethane; Optional clear coat.
Mixers furnished with standard safety decals and back-up alarm. Other safety features available